The TLV iT5-IS-RUN is a repeater for iTrapSensor wireless monitoring sensors based on the ISA 100.11a specification. It relays data between monitoring sensors and the access point, extending the overall communication distance of the system.

Features

The repeater provides reliable wireless data transmission and includes the following features:

• Enables high frequency monitoring with communication cycles configurable between 1 second and 1 hour.
• Offers a line-of-sight communication distance of 400 m between the repeater and sensors or other repeaters.
• Powered by a long-life battery pack that can be replaced in hazardous locations.
• Intrinsically safe construction suitable for use in both hazardous and non-hazardous locations.
• Available with an optional extended antenna type for remote antenna mounting.

Specifications

Model	iT5-IS-RUN
Type	Battery-powered
Wireless Frequency Band	2.4 GHz
Maximum No. of Hops	4 (from access point to sensor)
Communication Cycle	1 second to 1 hour
Power Source	Non-rechargeable lithium-thionyl chloride battery pack × 2 Rated voltage: 3.6 V Rated capacity: 76 Ah per pack
Battery Life	10 years for regular operation (5 TLV sensors with 60 s measurement cycle), or 5 years (20 TLV sensors with 60 s measurement cycle)
Intrinsic Safety Specifications	ATEX: II 1G Ex ia IIC T4 Ga UL/cUL: Class I, Division 1, Groups ABCD IECEx: Ex ia IIC T4 Ga Class I, Zone 0, AEx ia op is IIC T4, Ex ia op is IIC T4 UKEX: Ex ia IIC T4 Ga
Ambient Temperature (°C)	-40 to +80
Protection Class	IP66 and IP67 (evaluation for intrinsic safety is performed at IP20)
Material (Body, Cover)	Aluminium Alloy Die Castings (ADC3, SG100A)
Accessory	Mounting bracket
Option	Antenna extension: 150 mm antenna with 3 m or 13 m cable (intrinsically safe)

Wireless Module Specifications:

• Communication Protocol: ISA 100.11a, based on IEEE 802.15.4
• Regulatory Compliance: FCC, IC, CE compliant
• Frequency Bandwidth: 2.405 to 2.480 GHz
• Transmitter Power Output: 7.0 mW/MHz
• Communication Distance: Approx. 400 m (with a clear line of sight)

Note

1. Automatically set according to the sensor communication cycle settings.
2. Battery pack can be replaced in hazardous locations.
3. Battery life is given for 1 repeater used at an ambient temperature of 25 °C and may vary depending on environmental conditions such as the gateway used, transmission status, and ambient temperature. The battery life may decrease faster as the number of repeaters performing relay increases.
4. Depends on environmental conditions and installation location.

Dimensions

Units: mmApprox. Weight (kg): 3.0 (incl. battery pack)

Option

Units: mm

System Configuration Example

No.	Model	Function
1	Sensor: iT5-IS-SUN	Measurement of ultrasound and surface temperature, wireless transmission of information
2	Repeater: iT5-IS-RUN	Wireless relay of information
3	Access Point/Gateway	Relay of information via intranet
4	Data Collection Server	Importing collected data